Advances in Metallurgical and Mining Engineering -- Preface and Organizing Committee -- Table of Contents -- Chapter 1: Metallurgical Physical Chemistry -- Molecular Identification of a Strain Acidithiobacillus Ferrooxidans and its Biological Characteristics -- Kinetics of Leaching Vanadium with Sulfuric Acid from Carbonaceous Shale Containing Vanadium -- Influencing Factors and Mechanism of Cobalt Redissolution from Zinc Sulphate Solution -- Modeling Investigation of the Oxidation Kinetics of Copper and Aluminum Alloys -- Determination of Surface Tension of the Freeze Slag in Reaction Shaft of Flash Smelting Furnace -- Calculating Model of FetO Activity in Alkali-Containing BF Slag -- Recovery of Valuable Metals from Copper Slag by Hydrometallurgy -- Effect Evaluation of Inhibitor to Barium Sulfate and Strontium Sulfate -- Physical Simulation on the Liquid Metal Flow in FC-Mold of Slab Continuous Casting -- Mechanism of Precipitate Removal of Arsenic and Bismuth Impurities from Copper Electrolyte by Antimony -- Leaching Kinetics and Seperation of Antimony and Arsenic from Arsenic Alkali Residue -- Research on Detoxifying Treatment to Chromium Slag -- Comparison Study of the Electrochemical Behavior of Vanadate in NaOH and KOH Solutions -- Analysis of Factors Affecting Carbon Content Detection of Ferrochrome Alloy Using LIPS Method -- Detection of Carbon in Ferroalloy Using Internal Standard Method Based on LIBS -- Chapter 2: Ferrous Metallurgy -- Numerical Simulation of Flow-Induced Wall Shear Stress of a One Strand Tundish Design -- Experimental Investigation of the Viscosities of High Titanium Containing Slags with Low Mass Ratio of CaO to SiO2 -- Application of Data Mining in BOF Steelmaking Endpoint Control -- Isothermal Experimental Study on the Effects of Converter Bath Shape on the Melt Mixing.

Migration Principle of Chlorine in BF Production -- Causes and Countermeasures of Cracking in Cogging Process of 40Cr Bloom -- Application of Simulated Annealing Algorithm in Sintering Burdening Optimization -- Influence of Casting Speed on Solidification Process and Solidification Structure of Continuously Cast Bloom -- Effects of Operation Parameters on Desulphurization of Hot Metal with Passive Magnesium and Calcium Oxide in CSP Plant of WISCO -- High-Temperature Oxidation Kinetics of Galvalume-Coated Steel Sheet -- Influence of Hollow Electrode Ar-CH4 Co-Injection on Temperature in a Ladle Furnace with Alternating Current Supply -- MEST of Round Blooms with Different Foot Roll Pitch Designing for Peritectic Steel Casting -- Research and Application of the New Technologies on Blast Furnace at Shougang Qiangang Plant -- Numerical Simulation and Optimization Practice of Oxygen Lance for Converter Steelmaking -- Research on Thermal State of Mould Copper Plate with Different Heat Transfer Coefficient -- Study on the Influence Factor of the Caustic Calcined Dolomite Based Compound Desulfurizer Melt Point -- Study on Effect of Pressure to Nitrogen Solubility Limit in High Nitrogen Steels -- Process Analysis of Pb and Zn during Producing Iron Nuggets by Iron Bearing Dust -- Effect of Ladle Slag Modification on Slag Sticking to Snorkel and Rate of Slag Erosion -- Ore-Proportioning Optimization Technology in Pellet Process Based on Self-Characteristics of Iron Ores -- Phase Transformations and XRD Analysis of Austempered Ductile Iron -- Influce Mechanism on Compressive Strength of Coke in Blast Furnace -- Study on Fluid Flow in a Large Round Bloom Continuous Casting Mold -- The Effect of Time to Nitrogen Solubility in Steel with High Pressure and Bottom Blowing Nitrogen -- Nitrogen Control Technology for the Blowing Process of Combined Blowing Converter.

Study on Formation Mechanism of Frame-Shaped Segregation in 40Cr Wire Rod Rolled from Bloom -- Strength and Consolidation Mechanism of Green Pellets Containing Carbon -- Formation and Prevention of Sliver Defects on the Surface of Cold-Rolled Strip -- Phosphorus Distribution Equilibrium between CaO-FeO*-SiO2-P2O5(15%)-CaF2(B2O3) Slag System and Carbon-Saturated Hot Metal at 1573K -- Research on RDI+3.15 of Respectively Granulating Sintering -- Chapter 3: Metallurgy of Non-Ferrous Metals -- Acid Leaching of Vanadium from a Vanadium Residue -- Influence of Fe2O3 on Molten Slag Properties in Slag Splashing on Nickel Smelting Converter -- A Novel Method of Leaching Vanadium from Extracted Vanadium Residue Using Sodium Sub-Molten Salt Medium -- Study on the Removing of Ammonia Nitrogen in Ammonium Paratungstate Crystal Parent Solution -- Kinetics of Pressure Acid Leaching of Zinc from Zinc Silicate Ore -- Microstructure Evolution of A356 Aluminum Alloy Produced by Cooling Slope Method -- Evaluation of Melting Temperature of the Freeze Slag in Reaction Shaft of Flash Smelting Furnace -- Research of Biological Desilication Mechanism by Bacillus mucilaginosus GSY -- Material Ratio Optimization of Low Mass Ratio of Alumina to Silica of Calcium Aluminate Slag Based on Thermodynamic Calculation Method -- Nickel Loss during Iron Precipitation and Product Characterization -- Mechanism of Precipitate Removal of Antimony and Bismuth Impurities from Copper Electrolyte by Arsenic -- Zinc Removing from Aluminum Alloy by Vacuum Distillation -- Investigations of Alloying Elements and Rare Metals on the Hydrogen Content and Inclusion in Aluminum Alloy -- Upgrade Silicon Powder Prepared by SHS with Acid Leaching Treatment -- Effect of Polymer Surfactants on the Inhibition of Beta-Dicalcium Silicate Decomposition in Sodium Aluminate Solution.

Study of Tungsten Smelting Aqua System Heterogeneous Discipline -- Detection of Interface Displacement of Liquid Metal Using Magnetic Field Tomography -- Behavior of A356 Alloy in Semi-Solid State Produced by Mechanical Stirring -- Research of Prediction Method in Large Slope for Three Dimensional Object Deformation -- Chapter 4: Metallurgy Materials and Environmental Engineering -- Influence of Magnetic Field on as Industrial Waste Water Extraction -- Corrosion Behavior of Pb-Ca-Sn Electrodes for Copper Electrowinning -- Thermodynamics Analysis of Hot Metal Dephosphorization Flux Reaction Process -- Research Lifetime of Oil Film Bearing on High-Speed Wire Mill Based on Reliability Analysis -- Investigation of Cost Optimization of Pig Iron -- Fluid-Flow Characteristics and Critical Phenomenon in a Bottom Blowing Bath -- Study of Metallurgical Industry Smoke Characteristics and the Affect to the Performance of Electrical Precipitator -- Numerical Simulation on the Influence of Heating with Different Arrangement of Burners on the High Performance Hydrogen Bell-Type Annealers -- Research on New Thermal Reduction Process of Magnesium Preparation at Ordinary Pressure with Serpentine as Raw Material -- The Application of Breakout Prediction System with Thermal Imaging -- Monitoring Erosion Profile and Analyzing Reliability for Submerged Arc Furnace -- Thermodynamics of Pb(II) Complex Equilibrium in Pb(II)-NH3-NH4CI-H2O System -- Optimal Design of Heating System for Annular Furnace -- Visualization of Flow-Field between the Flapper and Nozzle in a Hydraulic Servo-Valve -- Formation of Protective Cr2O3 Scale at High Temperature and the Effect of Mass Transport in the Presence of Water Vapor -- Experimental Study of Sintering Flue Gas Desulphurization with Ferromanganese Ore Slurry -- Experimental Study on the Impact of Oxygen Lances on Bath Mixing in EAF.

Turbulent Flow of Molten Steel in Thin Slab Continuous Casting Mold -- The Coupled Heat and Mass Transfers in the Endothermic Chemical Reaction Packed Beds -- Generation and Emission Characteristics of Polycyclic Aromatic Hydrocarbons in Single Coal Coking Process -- Effect of Lance Nozzle Angle and Mixing Gas Blowing on BOF Process -- Study on Mechanism of Desulfurization by Spent Zn-MnO2 Batteries -- Road Performance of Concrete Incorporating Manganese Slag -- Combustion Performance and NO Emission in Industrial Furnace under Preheated Air Condition with Different Excess Air Ratio -- Large-Scale Rotary Steam Tube Drying System and Equipment for Copper Powder -- Numerical Calculation on Steel Coil during Annealing Process -- Prediction Model of Micum Strength for Iron Ore Sinter -- Improving Repeatability in Different Oxygen Probes at Low Oxygen Potentials in Molten Steel -- The Research on Breakout Prevention by Logical Judgement -- The Reason for Lose Efficacy of Electromagnetic Clutch Based on Mould Method -- Fixation of Thermocouple's Site and Established Value in Course of Desorption of Gold-Loaded Carbon -- Chapter 5: Mineral Processing -- Effect of Grinding Aids on the Fracture Energy of Mica -- Magnetic and Flotation: A Comprehensive Research for Recovery from Zinc Leach Residue -- Effects of Galvanic Interaction on Collectorless Flotation Behavior of Galena and Pyrite -- Investigation on the Beneficiation of Low-Grade Manganese Ore in Sichuan -- Study on the Influence of Precise Ball Size for Mineral Indexes -- Research on the Role of Pre-Oxidation in the Separation of Cu-Pb in the Presence of Potassium Dichromate -- The Research on Novel Technics for Fluorite Ore Containing Carbonate Minerals -- Industry Test on Phosphorus Removal and Direct Reduction of High-Phosphorus Oolitic Hematite Ore.

Study on the New Technique for Micro-Particle Cassiterite of Dachang Tailings.