Material Science, Manufacturing Technology and Advanced Design Technology -- Preface and Organizing Committee -- Table of Contents -- Chapter 1: Materials Science, Technology and Applications -- Test Study of Fracture Mechanical Properties of Reactive Powder Concrete with Additives -- Preparation and Characterization of PET/MMT Nanocomposition Modified by MDI -- Influence of Catalyst on the Extinguishing Effect of Inorganic Salt Fire Extinguishant -- Cold Extrusion Forming Aluminum Alloy Honeycomb Radiator Mold Structure Optimization -- The Interactions and Fire Extinguishing Mechanism of Inorganic Agent Complex -- Preparation and Microstructural Properties of Gallium Doped Zinc Oxide Thin Films for Organic Solar Cells -- Influence of SiH4 Flow Rate on GaN Films with In Situ SiNx Mask on Sapphire Surface -- Synthesis of CaAlSiN3:Eu2+ Phosphor via the Self-Propagating High Temperature Synthesis Method and its Optical Properties -- Investigation on Finite Element Simulation of ECAE with Variable Back Pressure for 7075 Aluminum Alloy -- Influence of Predeformation Temperature on Recovery Performance of Ni47Ti44Nb9 Alloy Φ16mm Pipe Joint -- Study on the Effect of Calender on Coating surface structure and Printability of Coated Paper -- Effect Sedimentation of TiB2 Particles on the Microstructure of 7075 Al Alloy -- The Drug Loading Kinetics Mechanism of Ion Exchange Fiber as a Novel Kind of Drug Carrier Material -- Characterizing the Influence of Drying on Ink Absorption Using Reconstructed Images by Laser Scanning Confocal Microscopy -- Influence of Panel Density on the Shear and Peel Property of Sandwich Composites -- The Transmission Spectrum of Symmetrical Structured One-Dimensional Photonic Crystals of Positive and Negative Materials -- Preparation of PVA Nanofiltration Membrane with Good Solvent Resistance.

The Research of Poly Propylene Carbonate /Nano-SiO2 Composites -- Study of Forward Osmosis Membrane Bioreactor -- Preparation and Wide Tunable Band-Gap Energies of PbTe Nanocrystals Using Glycerin as a Capping Ligand -- The Relationship of High Strength Aluminum Alloy Corrosion Behavior and Corrosion Environment -- Nanoemulsion Synthesis of Magnetic-Optical CoNiAu Nanoparticles -- Low Cycle Fatigue Behavior of Q345b Steel under Uniaxial Cycle Loading -- Study on a New Coumarin Derivative as Fluorescent Probe for Hg2+ Ions -- Effect of Aluminum on Mechanical and Frictional Properties of Copper Cladding Iron-Based Braking Material -- Preparation of Magnetic Iron Oxide by Hydrothermal Method -- Study on Conductive Polypyrrole/P(Ba-co-Aa)-g-PMMA-GMA Composites -- Durability Analysis on the Performance of Concrete Construction Based on Reinforcement Corrosion -- Preparation of Conductive Nanosilver Ink and its Application on RFID Tags -- The Application Study Status of Spacecraft Structural Materials -- Effect Factors Study on Ultimate Strength of Aluminum Stiffened Plates under Cyclic Loading -- UV Curable Polyurethane Dispersions Extended by a New Chain Extender -- Nanosurface Modifacation of Biomedical β Titanium Alloy for Dental Implant and its Antibacterial Property -- Polypyrrole/Graphene Oxide Composite Electrodes for High Energy Density Supercapacitor -- Graphene Oxide/Fe3O4 Composites Prepared via In Situ Precipitation -- Effect of Binder on Wear Behavior of HVOF WC-Based Coatings -- Well-Defined Blackberry-Like Polypyrrole Microspheres via Chemical Oxidative Polymerization in the Presence of Functional Floating Bead as In Situ Dopant -- Purification of Epothilones A and B with Column Chromatography on a Sephadex LH-20 -- Preparation and Characterization of Epoxy Resin Composite Modified by Flexible Polyurethane Resin.

Numerical Simulation of Filling for 7075 Alloy and TiB2/7075 Composites Wheel Prepared by Low Pressure Die Casting -- Studies on the Composition Characteristics of Pyrite from Dabaoshan Polymetallic Ore Deposit, Northern Guangdong Province -- Inhibition of Grain Coarsening in Nanocrystalline Fe-C Alloys by Interaction between Carbon and Grain Boundaries -- Development of Edible Packaging Materials -- Permeability of Packaging Materials -- Studies on the Effectes of XC Functionals and Basis Sets on the Geometrical Structures, Absorption and Emission Spectra of a 1,8-naphthalimide Derivative -- Study on the Preparation and Adsorption Properties of Activated Carbon Obtained from Chinese Herbal Medicine Residue -- Effect of Argon Gas Pressure on Optical Properties of Zinc Oxide Thin Films Deposited by RF Magnetron Sputtering Technique -- Research on Rolling about Copper/Aluminum/Stainless Steel Three-Ply Clad Sheet -- The Effect of Hard Milling on Surface Finish of Medium Carbon Steel -- Structural-Phase Transformations in R6m5 Steel while Electrolytic-Plasma Processing -- The Effect of Li-Al Alloy on Combustion Performance of B/PTFE Fuel-Rich Propellant -- A Comparative Study on the Fire Resistance of Ordinary Grade Structural Steels -- The Effects of Tensile Softening Curve Parameters on Fracture in Concrete Based on Initial Fracture Toughness Criterion -- Analysis of Stretching Load in Tension Stretching Process of Aluminum Alloy Thick-Plate by Using Finite Element Method -- Dynamic Rupture Analysis of Concrete Structures by FEM-DEM Method -- Chapter 2: Bio and Sustainable Manufacturing Technologies -- Saporin Conjugated with Transforming Growth Factor-α Inhibit Neointimal Proliferation by Specific Cytotoxicity -- Study of Single-Phase CIP Acidic Cleaning Agent Detergency -- The Application of PDLLA/β-TCP Conduits for Repair of Injured Sciatic Nerve.

A Method Optimizing the Forging Process of Titanium Alloy Blisk Based on the Processing Map -- Energy Loss Analysis of Flared Cuff for Branched Endovascular Graft Application -- Chapter 3: Monitoring, Testing and Control Technologies -- Application of PEM and OBIRCH to Defect Localization of Integrated Circuits -- Research on Crack Damage Identification Based on SFRF and Fiber Bragg Grating Sensors -- Study on Distributed Intelligent Control Model of the Ships Pipe Network -- The Technical Development for Increasing ROP with Particle Impact Drilling in China -- Investigation of Sound Field with Water Immersion TOFD Method Basing on Electron Beam Welding -- Structure and Motion Analysis of Robotic Arm Based on SolidWorks and Arduino -- Study on Friction Characteristics of Energizing Pneumatic Cylinders -- Matching Optimization of Impeller and Volute for Double-Channel with Double-Suction Pump -- Study on CNC System for Concave-Convex Surface Processing of Antique Style Flooring -- Simulation of Taper Roll Deviation Rectification Ability in Continuous Annealing Furnace -- An Improved Joint Target Tracking and Classification Algorithm Based on Data Fusion -- Comparison of the Two Methods to Determine State Parameters of Wet Saturated Steam -- Study on Reliability Growth Test Method for Disc Magazine and Manipulator -- Study on Wear Life Prediction of Wind Turbine Helical Gear -- Research on a Flow Resistance Mass Flow Sensor -- The Intelligent Control Method of Additive Manufacturing Flow Based on the Measurement of the Line Width -- Dynamic Sliding Mode Control of Parallel Robot Based on AC Servo-Motor Drive -- The Preparation and Performance Analysis of Metal Winding Gasket -- Application of Tracked Combine Harvester Step-Less Speed Regulated System -- Frequency Dependence Stiffness and Damping of "O" Rubber Ring.

Investigation into the Influence of Drying on Backtrap Mottle of Coated Paper -- Torsional Vibration of a Pile Embedded in Saturated Soil Considering Pile Construction Effect -- Study on the Permeability Characteristics of Coarse-Grained Soil and its Permeability Rule -- Study on the Anti-Seepage Reinforcement Scheme of Earth-Rock Dam for Changli Reservoir -- Chapter 4: Design, Modeling and Simulation -- Design and Application of the Testing System for a New Pipe Pressure Sensor -- Research on Metal Ring Strain Energy Power Loss of MB-CVT -- Parametric Design of Static Tube for Long-Distance Outboard Precision Atmospheric Static Pressure Measurement -- Application of Multi-Objective Optimization Algorithm Based on Physical Programming in Ship Conceptual Design -- Research on Conceptual Design of Green Electromechanical Products -- Application of Planetary Gear Transmission Technology in Tracked Combine Harvester -- Design of Measurement System for Underwater Vehicle Based on NAH -- Design of Injection Mould with the Curved Surface and Core-Pulling -- The Design and Application of the Curved Plate Adjust Tooling of PROTOS Cigarette Machine -- Influence Analysis of Hull Deformation on Dynamic Behavior of Propulsion Shafting -- Double Impulses Extraction of Faulty Rolling Element Bearing Based on EEMD and Complex Morlet Wavelet -- The Digital Design of Engine Connecting Rod Based on the CATIA -- Research on Load Bearing Behavior of Ship Stiffened Plates under Cyclic Loads -- Study on Ship Hull Deformation by Integrated Model of Hull with Shaft -- A Study on the Mechanical Properties of Disc Spring Vibration Isolator with Viscous Dampers -- Research on Load-Bearing Performance of I-Shaped Column under Cyclic Compression -- The Design and Application of the Platen Roller Pressure Regulating Device of PROTOS1-8 Cigarette Machine.

The Numerical Simulation of Punching and the Fatigue Analysis of Punch Based on ANSYS/LS-DYNA and ANSYS-Fatigue Tool.