Frontiers of Manufacturing Science and Measuring Technology IV -- Preface and Committee -- Table of Contents -- Chapter 1: Materials Engineering, Technology and Application -- A Comparative Study of Neat Epoxy Coating and NanoZrO2/Epoxy Coating for Corrosion Protection on Carbon Steel -- Analysis of Factors Influencing the Performance of Q460 Steel -- Development and Application of Aluminium-Lithium Alloy -- Friction and Rheological Properties of Meso-Porous MCM-41/Unsaturated Polyester In Situ Composites -- Experimental Study of Low-Pressure Water Jet Assisted Laser Drilling on Al2O3 Ceramic -- A New Method for Testing the Asphere Surface with a Liquid Crystal Spatial Light Modulator -- Analysis the Tool Wear of Screw Drill during the Drilling of Steel X04Cr16Ni12MnTiN -- Comparative Study of Different Cadmium Salts on Nano-Structured CdS Thin Films Prepared by CBD -- Corrosion Resistance of X52 Pipeline Steel at Sea Mud Zone -- Effect of Mn (II) Ion on Abrasive-Free Polishing of Hard Disk Substrate -- Experimental Study on Process Parameters of High-Speed Micro-Milling Al2O3 Ceramics -- Experimental Study on the Burning Behavior of Automotive Internal Decorating Materials -- Influence of pH Values on the Morphology and Down-Conversion Luminescence Properties of Zinc Tungstate Micro Nano Crystal Synthesized by a Hydrothermal Method -- Mechanical Properties Analysis and Application of Metal Matrix Composites -- Medical Building Materials of Structural Properties and Electromagnetic Interference Shielding in the Quartz Crystal Plane Coated Ni Based Thin Film -- Morphology-Controlled Synthesis of ZSM-5/MCM-41 Composite Zeolite -- Near Net Shape Forming Process of a Titanium Alloy Component Using Hot Isostatic Pressing with Graphite Mould -- Nitrogen Doping Effects on Microstructure of Multi-Walled Carbon Nanotubes.

Research on Feasibility and Applicability of Delamination Localization Methods for Composite Laminated Beams -- Side Effects on Enhancing Chemical Herbicides to Control Proposal -- Simulation Research on Optical Performance of Multicrystalline Silicon Texture Structure -- Strengthen of Mechanism of 30CrMnSiNi2A Steel Welded Joint with Ultrasonic Impact Treatment -- Study on Ball Milling of TiH2 and Application in Energetic Materials -- Study on Corrosion Damage Rule for Two Type of Aluminum Alloy -- Study on Features and Application of Typical Smart Materials -- Study on Nanometer ATO Powder Prepared with Citric Acid as Dispersant and its Conductive Properties -- Surface Modification on Rabbit Hair Fiber for Anti-Static and Ultraviolet Protective Properties via ZnO Nanopartciles -- Synergistic Effects of a Red Phosphorus Master Batch on a Modified Intumescent Flame Retardant ABS Composites -- Synergistic Flame Retardant Effect of Fumed Silica and Zinc Borate with Magnesium Hydroxide in ABS Based Flame Retardant Composites -- Texture Evolution of Friction-Stir-Welded 5A30 Aluminum Alloy Plate -- The Aging Properties of Bamboo-Poplar Composite Oriented Strand Board with Different Hybrid Ratios -- The Development of Double Composite Flexible Radar Absorbing Fabrics Based on Iron Fibers -- The Discussion about Concrete on the Relationship between Corrosion Resistance and Time under Bending Loads -- The Friction and Wear Properties of Cu-Te-Li Alloys with High-Strength and High-Conductivity -- The Range Distribution of Yb Ions Implanted in 6H Silicon Carbide -- Ultrasonic Inspection for Metal Creep Based on Flight-Time-Attenuation -- Corrosion Behavior of Titanium Alloy and Titanium in Different Solution -- The Analysis of Temperature Field of Concrete Beam of Hydration Heat.

Effect of Fumed Silica and Zinc Borate on the Thermogravimetric Analysis Curves of ABS/Magnesium Hydroxide Composite -- Analysis the Machined Surface Quality during the Drilling of Steel X04Cr16Ni12MnTiN -- Double Sided Explosive Cladding of Stainless Steel and Regular Steel -- The Influence of Particle Diameter on Analytical Results -- Experiment Research of Laser Induced Air Breakdown -- Chapter 2: Applied Mechanics, Design, Simulation and Manufacturing -- A Study of Simulation of Hydropreumatic Suspension Experiment Rig Based on AMESim and Matlab/Simulink -- 90W Off-Line High Power Factor Correction Module Design -- Applications of the Photothermal Cohesion Technology in the Fresh Air System and Air Purification Devices -- Based on Rub a Drum Machine Four-Axis Machining Fixture Design and Modeling in Solidworks and Virtual Assembly -- Based on Solidworks and Mastercam Combined for Rub a Drum of Four-Axis NC Machining Programming Research -- Cavitation Effect to the Hydraulic Piston Pump Flow Pulsation -- Comparison of the Load with Different Loading Ways in the Finite Element Model of the Mobile Air Compressor Frame -- Deformation Analysis of Dam with the Improved Wavelet Threshold -- Design and Analysis of a Novel Micro Flying Head in Mass Storage System -- Design and Optimize the Branch Pattern of Herringbone Well -- Design and Simulation for Braking System of FSAE Racing Car -- Design and Simulation of a Descent Control Device Based on Hydraulic Damping -- Design of a Type of Lift Coating Machine -- Design of Injection Mould for the Special-Shaped Claw Cover of an Automatic Breast Pump and Milking Machine -- Design of Testbed for Feel Simulator of Battleplan -- Development of Hole-Based Self-Centering Marking Gauge -- Development of the Assistant Positioning Device of Parallel Machine Vice -- Disk Cam Contour Design Based on Inventor 2009.

Dynamic Modeling of Shaking Table Based on Simulink/SimMechanics -- Dynamics Analysis of a 3-DOF Parallel Mechanism -- Effect of the Rudder on the Vibration Frequency of Wind Turbine -- Electromagnetic Simulation and Dynamic Analysis about the Electromagnetic Propelling System of Magnetic Suspension Launcher -- Fault Diagnosis Approach for Incipient Bearing Fault in Wind Turbine under Variable Conditions -- Finite Element Analysis and Experimental Research for Horizontal Tank to Internal Magnetic Flux Leakage Detection -- Hardware Design of Automotive Parking Heater Remoter and Receiver -- Heavy Duty Automobile Self-Discharging Hydraulic System Design -- Horizontal Well Fracturing Optimization Numerical Simulation -- Hydraulic Excavator Boom Lightweight Design -- Intensive CNC Machine Programming with Circular Pattern Algorithm -- Machine Gun Finite Element Model Amending Based on Frequency Response Functions of Vibration -- Modeling and Simulation of Turbofan Engine Based on Modularized Subassembly -- Modular Design Technology of Multi-DOF Mechanical Arm -- Multi-Objective Collaborative Optimization of Spring -- Numerical Investigation of Tip Clearance Flow in an Axial Compressor Cascade -- Numerical Simulation of the Shell Fragments Damage-Field Based on ANSYS/LS-DYNA -- Numerical Simulation Research of Air-Assisted Atomizer Internal Gas Flow Field Based on Fluent -- Parametric Design of Tapered End Mills with Variable Pitch for Improving Stability -- Permeability Improvement Technology of Directional Hydraulic Fracturing in Low Permeability -- Pre-Deformed Design of Optical Lenses with Reverse Engineering and Virtual Manufacturing -- Research and Development of a Knowledge-Based System for Blanking Die -- Research on Attitude Singularity Problem of Small Tail-Sitter Aircraft.

Research on CNC Machining System of Directly Driven by Image Based on PMAC -- Research on Influence Factors of Landing Gear Retractile Hydraulic System Performance Degradation -- Research on the Forming Path for Fabricating the Sheet-Metal Part with Non-Horizontal End Face Using CNC Incremental Forming -- Research on the Simulation of NC Milling Program Based on VERICUT Oriented to the Five-Axis Micro-Milling System -- Research on the Stress Uniformity of the High Speed Bearing with Heavy Load in Cold Rolling -- Research on Typical Vibration Accelerations of Wind Wheel Changing with Yaw Angle -- Rolling Bearing Feature Extraction Based on Wavelet Filtering with Optimal Combination Bands -- Second-Order Two-Scale Asymptotic Expansions for Thermopiezoelectric Problems in Periodic Structure -- Simulation and Design of Portable Underwater Acoustic Transducer Test Device -- Simulation and Optimization Design of Gasoline Engine Exhaust Muffler -- Simulation and Optimization for the Cooling System of Heavy Vehicle Engine -- Simulation and Parameter Design of a 10kw Wireless Power Transfer System Applied to Gantry Crane -- Simulation and Test Study of Multidisc Magneto-Rheological Fluid Clutch -- Simulation Study on a Parallel Hybrid System of Hydraulic Excavator -- Structural Optimization of Drilling Bed for Deep Hole Drilling Machine -- Study on Influence of End Concavity of Rolled Piece by Billet Circular Arc Angle with CWR -- Study on Split-Open Loading in V-Shaped Components Forming Process -- Study on the Welding of Feeder Hopper and Cylinder Instead of Casting Process -- The Design of the Fixture for the Thin Wall Cone Parts -- The Design of Wave Height Standard Device in the WTTVS and its Error Analysis -- The Design Research on the Key Components of Low-Speed Marine Diesel Engine -- The Forced Response Analysis of Heavy Duty Vehicle's Cab.

The Nanocutting by Rigid/Elastic Tools with Nose Radius at the Gas Environment Using Molecular Dynamics Simulations.