Binders and Materials XI -- About ICBM and Committees -- Table of Contents -- Chapter 1: Cement and Binders Based on Cement -- Influence of Preparation Parameters on Properties of Belite Clinker -- Study of Increasing of Belite Reactivity -- Proposal and Testing Masonry Cement -- Testing Self-Levelling Floor Screeds on the Basis of Ternary Binder -- Thermoanalytical Study of Binders Containing Pozzolanic and Latent Hydraulic Materials -- Reduction of CO2 Emissions at Firing of Binders Type Portland Cement -- Sodium Hexametaphosphate as Deflocculation Agent for Calcium Aluminate Cements in Porcelain Body -- Influence of Different Grinding Types on Granulometry of Cement Grains -- Chapter 2: Inorganic Binders -- Performance of Fiber-Cement Boards in Biogenic Sulphate Environment -- Decorative Multi-Component Alkali Activated Cements for Restoration and Finishing Works -- Testing of Clay Used for Building a Folk House Replica by Traditional Techniques -- Industrial Resources for the Production of Sulphate Binders -- Efficiency of Sulphate Paste Liquefaction -- Influence of Grinding α-Gypsum on its Final Property -- Preparation and Properties of Pressed Metakaolin and Fly Ash Based Alkali-Activated Binders -- Thermal Insulating Alkali-Activated Materials with Lightweight Aggregate -- Analysis of Possibility of Using Geopolymers in Rehabilitation of Reinforced Concrete Structures -- Modification of the Raw Mix for Firing of Dicalcium Silicate Using Potassium Sulphate -- Chapter 3: Organic Binders -- Repair of Composite Structure Using Cold Sleeve with Polymer Filling Material -- Properties of Polyurethane and Epoxy Modified Cementitious Hybrids for Flooring Systems -- The Behavior of the Advanced Materials for Blast Energy Absorption under Low and High Velocity Load -- The Influence of Silane Coupling Agent on Glued Spruce Wood Using Epoxy Adhesive.

Bitumen Substance Analysis -- Chapter 4: Silicate Materials -- Determination of Sintering Activity of Sodium-Potassium Feldspar -- Development of Advanced Masonry Structures with Utilization of Alternative Thermal Insulating Materials -- Physical-Mechanical Aspects of Preparing Thermal Insulation Materials on the Basis of Liquid (Water) Glass -- Possibilities of Reducing the Apparent Porosity of Silica Bricks for the Coke Batteries -- Pozzolanic Aktivity Increase of Recycled Glass -- Chapter 5: Building Materials -- Comparison of Impedance Spectra of Concrete Recorded with Utilizing Carbon Transition Paste -- Reactivity of Brick Powder in Lime Mortars -- To the Problems of Determination of Dynamic Elasticity Modules of Calcium Silicate Bricks by Means of Resonance Method -- Corrosion Inhibitors as a Prevention -- The Effect of Concrete Quality on the Acoustic Emission Parameters during Three-Point Bending Fracture Test -- Possibilities of Hydrophobization of Thermo-Insulating Materials Based on Natural Resources -- Influence of Contact Parameters on Load-Carrying Capacity of Hybrid Composite Cross-Section -- Reinforcement Corrosion versus Crack Width -- Study of Cement Composites Properties with Filler Based on Wood Pulp -- Chloride Diffusion in Limestone Cement Concrete Exposed to Combined Chloride and Sulfate Solutions at Low Temperature -- Effect of Metakaolin Sand on Properties of Cement Composites -- Comparison of the Values of Compressive Strength and Elasticity Modulus of Concrete of Frozen and Unfrozen Specimens -- Effect of Modification of Cement-Bonded Particleboards Composition on their Frost Resistance -- Basic and Hygric Properties of Concrete Containing Fine Ceramic Powder -- Fracture and Mechanical Properties of Fire Resistant Fibre Composites Containing Fine Ground Ceramic Powder.

Basic Characteristics of Green Cements of CEM V/A and V/B Kind -- Study of Influence of Fly Ash Character on its Behaviour during Clinkering Process -- The Use of Industrial Waste as a Secondary Raw Material in Restoration Plaster with Thermal Insulating Effect -- Development of a New Kind of Aerated Screeds for Lightweight Floors -- Surface Morphology Study on Fibres Treated in Cold Plasma Discharge -- Study of Effect of Various Types of Cement on Properties of Cement Pastes -- Effect of High Proportion of Blended Cement in Concrete -- Study of Properties of Sprayed Concrete Prepared in Laboratory -- Use of Impact-Echo Method to Test High-Temperature Degraded Cementitious Composite Materials Containing Rubber Aggregates and Acrylic Polymer Binder -- Resistant Multilayer Floor Systems Based on Epoxy Binders with Recycled Various Glass Particles -- Possibilities of Recycled Concrete Aggregate in Cement-Based Flowscreed -- The Use of Cementation Process for Waste Industrial Sludge Solidification -- Sealing Layers on Concrete Bridge Decks -- Development of Resistant Coating Systems Based on Polymer Binders -- The Influence of Vacuum Mixing on the Porosity of Ultra High Performance Concrete -- Use of Blast Furnace Slag Cements for the Construction of a Canal Lock -- Rehydration of Ultra High Performance Concrete -- Perlite Concrete Based on Alkali Activated Cements -- Polypropylene Fibres and Micro Cracking in Fire Exposed Concrete -- Carbonation Depth vs. Physical-Mechanical Properties of Concretes with Alternative Additions of Concrete Recyclate and Silicate Admixtures -- Mixing of Different Particle-Size Fractions of Fly Ash to Increase its Activity in Cement Composites -- Autoclaving Time Influence on Fly Ash Aerated Concrete Compressive Strength and Microstructure -- Analysis of Building Stone of the Medieval Historical Building.

Polymer-Modified Mortars with Increased Amount of C-S-H Phase -- The External Thermal Insulation Material Made of Technical Hemp -- Application of Alternative Fillers in the Cement-Bonded Particleboards Structure -- Chapter 6: Other Related Topics -- Laboratory Verifying of Injection Screens Efficiency -- On Some Aspects of Application of Vegetative Roofs in Building Structures -- Identification of Thermal Conductivity of Powdery Insulation Materials -- Keywords Index -- Authors Index.