Part 1. Energy Technologies and CO2 Management Symposium -- Gas Hydrate-based CO2 Separation Process: Quantitative Assessment of the Effectiveness of Various Chemical Additives Involved in the Process -- Tar Removal from Hot Coke Oven Gas for H2 Amplification with In Situ CO2 Capture -- An Evaluation Method for Material and Energy Conversion Effect with Steel Manufacturing Process Data -- Preparation and Characterization of Activated Carbon from Waste Ion-exchange Resin for CO2 Adsorption -- Evaluation of Variation in the Life Cycle Based Environmental Impacts for Copper Concentrate Production -- Direct Reduction of Copper Slag Composite Pellets within Lignite Using Biomass as Binder -- Thermodynamic Analysis of Incineration Treatment of Waste Disposable Syringes in an EAF Steel-making Process -- The Reduction Kinetic of the Combined Cu-based Oxygen Carrier Used for Chemical Looping Gasification Technology -- Synergistic Effect Between Fat Coal and Poplar During Co-pyrolysis with Thermal Behavior and ATR-FTIR Analysis -- Flow Characteristic of Two-phase Bubble Reactor for Slag Waste Heat Recovery -- Improving Energy Efficiency in Direct Method for Continuous Casting of Lead Sheets -- Research on High Efficiency Energy Conversion Technology for Modern Hot Blast Stove -- An Exergy Study of Cowper Stove Operations with an Iron Blast Furnace -- Waste Heat Recovery from Aluminum Production -- Leaching and Carbonation of Electric Arc Furnace(EAF) Slag under a Microwave Field for Mineral Carbonation -- A Novel Preparation of Bi2O3 and Their Potent Photocatalytic Activity under Visible-light Irradiation -- Energy Conservation in Sintering Ignition Process Based on Comprehensive Ignition Intensity -- Part 2. Deriving Value from Challenging Waste Streams: Recycling and Sustainability Joint Session -- Behavior of Co, Ni and Precious Metals in Copper Converting Process: Experimental Study -- Recycling of EAF Dust through Source Separation -- A Sustainable Methodology for Recycling Electric Arc Furnace Dust -- Thermal Separation and Leaching of Valuable Elements from Waste-derived Ashes -- Different Methods for the Characterization of Ash Compositions in Co-firing Boilers -- Utilization CFA-derived Tobermorite Fiber as Crystallization Revulsive in Autoclaved Concrete Block Production -- An Electrochemical Procedure for Copper Removal from Regenerated Pickling Solutions of Steel Plants -- Upgrading the Copper Value in a Waste Copper Smelter Dust Using the Falcon Concentrator -- Towards Commercialization of Indium Recovery from Waste Liquid Crystal Display Screens -- Engineering, Scientific, and Policy Inputs for Developing a Levelized Cost of Energy Storage Model -- Recovery of Gallium and Arsenic from Gallium Arsenide Semiconductor Scraps -- Rapid Removal of Pb(II) from Acid Wastewater using Vanadium Titanium-bearing Magnetite Particles Coated by Humic Acidcoated by humic acid(VTM-HA) Magnetic Particles -- Study on the Technology of Synthesizing MgAl2O4 Spinel Refractory Material from Waste Chromium Slag of a Certain Chrome Plant in China -- Effect of Ferrosilicon on Reduction of Cr2O3 in Steelmaking Slags -- Bacterial Degradation of Free Cyanide in Alkaline Medium Using Bacillus Licheniformis Strain -- Determination of Limiting Current Density of a Solution with Copper, Zinc and EDTA from the Effluent of Brass Electrodeposition -- Effect of the PH on the Recovery of Al3+, Co2+, Cr3+, Cu2+, Fe3+, Mg2+, Mn2+, Ni2+ and Zn2+ by Purolite S950 -- Evaluation of the Occurrence of Fouling and Scaling on the Membrane HDX 200 for the Treatment of the Effluent of Brass Electrodeposition with EDTA as Complexing Agent -- High Temperature Crystallization Kinetics of MgSO4.H2O -- Preparation of Glass-ceramic from Titanium-bearing Blast Furnace Slag by “Petrurgic” Method -- Recovery of Copper from Nickel Laterite Leach Waste by Chemical Reduction Using Sodium Dithionite -- Recovery of Nickel and Cobalt from a Waste Zone of Nickel Laterite Ore Using a Mixture of Extractants in Solvent Extraction Technique -- White Ordinary Portland Cement Paste with Iron Oxide Powders Containing Arsenic Contents -- Part 3. Solar Cell Silicon -- Three-Dimensional Crystal-Plasticity based Model for Intrinsic Stresses in Multi-Junction Photovoltaic -- A Review of Solar Silicon Recycling -- Thermo-Calc of the Phase Diagram of the Fe-Si System -- Crystal Growth Mechanism of Si in Hypereutectic Al-Si Melt during the Electromagnetic Directional Solidification -- Thermo-Calc of the Phase Diagram of Calcium Silicon (Ca-Si) System -- Leaching of Indium from ITO Present in Amorphous Silicon Photovoltaic Modules -- Part 4. Materials for Energy Conversion and Storage -- Direct Performance Simulation Based on the Microstructure of SOFC Electrodes: A Phase Field Approach -- Effect of Sonication Power on Al2O3 Coated LiNi0.5Mn0.3Co0.2O2 Cathode Material for LIB -- Effect of Nano-graphite Dispersion on the Thermal Solar Selective Absorbance of Polymeric-based Coating Material -- Synthesis of MoAlB Particulates and Their Porous Derivatives by Selective Deintercalation of Al from MoAlB -- A New Economical Method for Fabricating High-purity Bi2O3 via Extraction-precipitation Stripping and Post Annealing -- Part 5. Stored Renewable Energy in Coal -- Aluminum-silicon Alloys Prepared from High-aluminum Fly Ash to Extract Magnesium from Serpentine -- Organic Agriculture Using Biomaterial Coal -- Extraction and Production of Rare Earth Elements from Coal Seam Bedrock and Caprock -- Extraction and Thermal Dissolution of Low-rank Coal by N-methyl-2-pyrrolidinone -- Enhancement of Coal Nanostructure and Investigation of its Novel Properties.