Post delineator mechanical fatigue evaluation
tarafından
 
Zwahlen, Helmut T.

Başlık
Post delineator mechanical fatigue evaluation

Yazar
Zwahlen, Helmut T.

Yazar Ek Girişi
Zwahlen, Helmut T.

Fiziksel Tanımlama
xiii, 121 pages : illustrations ; 28 cm

Genel Not
Prepared in cooperation with the Federal Highway Administration and the Ohio Dept. of Transportation.
 
"April, 1989."

İçerik
Introduction -- Experimental approach -- Results. Review of damage -- Review of natural frequency and dynamic deflection (top of post test specimen) behavior -- Adjustment procedure to equalize the different free lengths of the post delineator test specimens -- Extrapolation of the static horizontal deflection from test specimens to a 48 inches free length post -- Preliminary testing for lexan delineator -- Preliminary test for XX, C, T and S posts -- Conclusions -- Testing recommendations -- Reference.

Özet
The mechanical fatigue performance to sinusoidal horizontal oscillations (at natural frequency of the post delineator test specimen, 16 in. free length) was investigated for four types of post delineators. One was an X-shaped post made of a polycarbonate material, two were fiberglass reinforced thermoplastic posts (T-shape and C-shape) and one was a round polyethylene tube. Three post delineator test specimens were tested for new post, post put into the ground and driven over once with the rear tire of a slow driving tractor, post driven over twice (in same direction) and post driven over three times.

Konu Başlığı
Road markings -- Testing.
 
Reflectors (Safety devices) -- Testing.

Tüzel Kişi Ek Girişi
Ohio. Department of Transportation.
 
Ohio University. Department of Industrial and Systems Engineering.


LibraryMateryal TürüDemirbaş NumarasıYer NumarasıDurumu/İade Tarihi
İnşaat MühendisliğiKitapB027326TE228 .Z83 1989Transportation Collection