Heat and mass transfer characteristics of adsorbents in heat pump and refrigerator
tarafından
 
Gündoğan, Şefika Çağla, author.

Başlık
Heat and mass transfer characteristics of adsorbents in heat pump and refrigerator

Yazar
Gündoğan, Şefika Çağla, author.

Yazar Ek Girişi
Gündoğan, Şefika Çağla, author.

Fiziksel Tanımlama
xiii, 165 leaves: charts;+ 1 computer laser optical disc.

Özet
Due to increasing drought, pandemic and climate crisis in recent years, researchers have increased their studies on environmentally friendly energy use. Although there are technological developments in the production of energy from renewable energy sources, the storage of this produced energy is still a problem that awaits a solution. At this point, adsorption heat pumps with high primary energy efficiency come to the fore as a developing technology and attract the attention of researchers. However, low heat transfer properties in the adsorbent bed reduce the performance of adsorption heat pumps and limit their applications. The aim of this thesis was to improve the performance of the adsorption heat pump by increasing the effective thermal conductivity within the adsorbent bed. Two methods have been employed to enhance the effective thermal conductivity. In the first method, which was unconsolidated adsorbent bed design, it was aimed to increase the thermal conductivity of the bed with metal additives with a continuous structure. In the second method, which is known as consolidated bed design, the effective thermal conductivity of zeolite 13X was tried to be enhance with a high conductive material, reduced graphene oxide. In the experimental studies, it was observed that the thermal conductivity increased from 0.12 W/m.K to 0.28 W/m.K in unconsolidated bed design by means of fin-shaped metal additive. In consolidated adsorbent bed design, the effective thermal conductivity of the Graphene/Zeolite 13X (1 wt% Graphene) was determined as 0.1613 W/m.K. In theoretical studies, the effect of thermal conductivity in the temperature, pressure and adsorbate concentration was investigated. The indirect and direct effects of effective thermal conductivity on specific cooling/heating power (SCP/SHP) and coefficient of performance (COP) values were examined. Although the effect of thermal conductivity on COP was ignored in most of the studies in the literature, it was observed that COP increased from 0.01 to 0.10 when thermal conductivity increased from 0.12 W/m.K to 1 W/m.K.

Konu Başlığı
Heat pumps.
 
Heat -- Transmission.
 
Mass transfer.
 
Heat engineering.

Yazar Ek Girişi
Çakıcıoğlu Özkan, Seher Fehime,

Tüzel Kişi Ek Girişi
İzmir Institute of Technology. Chemical Engineering.

Tek Biçim Eser Adı
Thesis (Doctoral)--İzmir Institute of Technology:Chemical Engineering.
 
İzmir Institute of Technology:Chemical Engineering--Thesis (Doctoral).

Elektronik Erişim
Access to Electronic Versiyon.


LibraryMateryal TürüDemirbaş NumarasıYer Numarası
IYTE LibraryTezT002666TJ260 .G97 2022