Processing and characterization of novel graphene containing inks
tarafından
 
Yüksel, Seda Sultan, author.

Başlık
Processing and characterization of novel graphene containing inks

Yazar
Yüksel, Seda Sultan, author.

Yazar Ek Girişi
Yüksel, Seda Sultan, author.

Fiziksel Tanımlama
x, 44 leaves: charts;+ 1 computer laser optical disc.

Özet
Scientific and industrial community currently has an increased interest in printed electronics due to its many advantages. Metallic nanoparticles and conductive polymers are mostly used in the processing of commercial conductive inks. There is extensive research and development efforts on alternative materials as conductive fillers due to high cost, chemical instability in air and liquid media of widely used fillers. Graphene materials comprised of a single layer or multiple layers of graphene flakes have recently attracted great interest and used in applications as an excellent conductive filler due to its optical transparency, high conductivity, and flexibility. The aim of this MSc work was to prepare graphite and carbon black based conductive inks. Effects of graphite (G) to carbon black (CB) ratio and the use of exfoliation liquid on conductivity, rheology and particle size distribution were investigated for graphite containing conductive inks. Inks with the lowest resistance of 0.02 kΩ was obtained by using ball milling in N-metil-2-pirrolidon (NMP) as exfoliation liquid with the lowest particle size with an average of 18.0 μm. Inks prepared in this work showed shear thinning behavior independent of the exfoliation liquid used in their preparation. The highest thixotropy was measured in water exfoliated ink with 1801 Pa.s-1 and this dispersion had the lowest conductivity. A series of inks with different graphite to carbon black ratios were prepared under similar conditions. The lowest resistance 0.045 kΩ was determined at a graphite to carbon black ratio of 1 by using ethylene glycol as an exfoliation liquid. The use of ethylene glycol in commercial ink preparation may be advantageous due to its lower cost and environmentally friendly chemical properties. The highest degree of thixotropy and viscosity was measured in ink prepared at G/CB ratio of 0.5. This ink also had the highest resistance due to low amount of graphite compared to carbon black which indicated the critical importance of G/CB ratio.

Konu Başlığı
Ink
 
Printing ink
 
Graphene

Yazar Ek Girişi
Çiftçioğlu, Muhsin,

Tüzel Kişi Ek Girişi
Izmir Institute of Technology. Chemical Engineering.

Tek Biçim Eser Adı
Thesis (Master)--İzmir Institute of Technology: Chemical Engineering.
 
İzmir Institute of Technology:Chemical Engineering--Thesis (Master).

Elektronik Erişim
Access to Electronic Versiyon.


LibraryMateryal TürüDemirbaş NumarasıYer Numarası
IYTE LibraryTezT002628TP946 .Y94 2022