The effect of deformation rate on the damage tolerances of nomex honeycomb cored composite sandwiches
tarafından
 
Çelik, Muhammet, author.

Başlık
The effect of deformation rate on the damage tolerances of nomex honeycomb cored composite sandwiches

Yazar
Çelik, Muhammet, author.

Yazar Ek Girişi
Çelik, Muhammet, author.

Fiziksel Tanımlama
xi, 78 leaves: charts;+ 1 computer laser optical disc.

Özet
The impact response and damage tolerance of E-glass/epoxy faces and Nomex honeycomb core sandwich were determined experimentally at different velocities (0-40 ms-1). Concentrated quasi-static indentation force (CQIF), low-velocity impact (LVI) and high-velocity impact (HVI) tests were performed sequentially using a universal test machine, a drop weight tester and a modified Split Hopkinson Pressure Bar system using a hemispherical indenter with a diameter of 16 mm. Velocity was increased by reducing the mass of the indenter in HVI. HVI was performed at the same impact energies (3-33 J) as LVI. Although CQIF and LVI showed similar damage modes, front face damage initiation and perforation occurred at higher energies in LVI, which was ascribed to the rate sensitivity of the face material. When the front face was penetrated at 10 J, residual strength was found to reduce 60%. The flexural waves and core shear were observed to become dominant above 40 J. Barely visible damage was identified below 10 J with a dent depth less than 1 mm, the damage area less than 50 mm2 and an NRS of ~0.8. Visible damage occurred between 50-400 mm2 damage areas when the front face was perforated (10-39 J). Discrete source damage was detected between 400-800 mm2 where fullpenetration and core shear occurred (>40 J). Although damage areas in HVI were smaller than those of LVI at the same energies, compression after impact tests showed almost no effect of velocity on NRS, except HVI tested coupon showed a slightly higher mean NRS at 5.5 J.

Konu Başlığı
Sandwich construction.
 
Honeycomb structures.
 
Deformations (Mechanics)

Yazar Ek Girişi
Güden, Mustafa,

Tüzel Kişi Ek Girişi
İzmir Institute of Technology. Mechanical Engineering.

Tek Biçim Eser Adı
Thesis (Master)--İzmir Institute of Technology: Mechanical Engineering.
 
İzmir Institute of Technology: Mechanical Engineering--Thesis (Master).

Elektronik Erişim
Access to Electronic Versiyon.


LibraryMateryal TürüDemirbaş NumarasıYer Numarası
IYTE LibraryTezT002371TA492.S25 C39 2021