Use of metal templates for microcavity formation in alumina
tarafından
 
Balkan, Sırma.

Başlık
Use of metal templates for microcavity formation in alumina

Yazar
Balkan, Sırma.

Yazar Ek Girişi
Balkan, Sırma.

Yayın Bilgileri
[s.l.]: [s.n.], 2011.

Fiziksel Tanımlama
xii, 67 leaves.: ill. + 1 computer laser optical disc.

Özet
Alumina ceramics with microtunnels are produced by compressing submicron sized alumina powder and Ti, Cu or stainless steel wires in a metal die before firing the compacts at 1350oC for 4 hours. Diameters of wires ranged from 50 to 125 micrometers. Copper was found to completely melt and flow away from the compact leaving no trace of copper in alumina. Stainless steel diffused out into the alumina leaving few pores behind. Titanium, on the other hand, diffused into alumina at 20 to 30micrometers/hour and left plenty of Kirkendal porosity behind. The amount of porosity could have been increased further by applying intensive milling to the powder. But no milling was done in this study and hence a complete micro-tunnel was not obtained. The Kirkendal effect was observed to be effective in producing pores in the ceramic. Densification behavior of the ceramic was also investigated with a vertical dilatometer. Densities up to 93% were achieved in the ceramics. In some tests Ti metal plates were used as diffusion couples with alumina compacts. Similar diffusion behavior was observed with plates and wires.

Konu Başlığı
Porosity.
 
Ceramic materials.
 
Materials science
 
Metals.

Yazar Ek Girişi
Akkurt, Sedat.

Tüzel Kişi Ek Girişi
İzmir Institute of Technology. Materials Science and Engineering.

Tek Biçim Eser Adı
Thesis (Master)--İzmir Institute of Technology:Materials Science and Engineering.
 
İzmir Institute of Technology: Materials Science and Engineering--Thesis (Master).

Elektronik Erişim
Access to Electronic Versiyon.


LibraryMateryal TürüDemirbaş NumarasıYer NumarasıDurumu/İade Tarihi
IYTE LibraryTezT000998TA418.82 .B186 2011Tez Koleksiyonu