Design modification of a front window mechanism for the cabin of an earth moving machine
tarafından
 
Jovichikj, Radomir, author.

Başlık
Design modification of a front window mechanism for the cabin of an earth moving machine

Yazar
Jovichikj, Radomir, author.

Yazar Ek Girişi
Jovichikj, Radomir, author.

Fiziksel Tanımlama
xi, 55 leaves: color illustraltions.+ 1 computer laser optical disc.

Özet
This thesis study investigates the front window mechanism used in an earth moving machinery. Since the mechanism is actuated by the operator, the required actuation force for the mechanism needs to be as minimum as possible. The problem of this thesis is defined by Turkey branch of Mecalac Company and the final test of this study are performed in their facility. First, the problem definition and aim of the study is presented. Furthermore, the literature review is also presented. Then, the current mechanism attached on the earth moving machinery is investigated. Firstly, kinematic analysis is performed in order to be able to perform the force analysis. Following that, using three different approaches (Newton-Euler approach, virtual work method and graphical approach), the static force analysis is done. The aim of this analysis to obtain the required actuation force, both for opening and closing the mechanism. By using three different approaches, the result obtained after each method are compared and confirmed. Furthermore, a simulation of the mechanism is prepared in MATLAB/Simulink® environment. This step provided a numerical simulation verification for the resulting actuation forces. Then the work carried out for the minimization of the actuation force is presented. By changing the parameters of the springs attached on the current mechanism, changing the link lengths of the mechanism and changing the application point of the actuation force, the change in the magnitude of the required actuation force is observed and minimized. Among all trials, only changing the spring position led to useful results. Finally, the test setup to measure the performance and experimentally verify the proposed solution is explained and the results are given. The results show that with the modified location of the spring, both of the maximum force requirements and the work requirements are lowered.

Konu Başlığı
Excavating machinery -- Design and construction.
 
Construction equipment -- Design and construction.

Yazar Ek Girişi
Kiper, Gökhan,

Tüzel Kişi Ek Girişi
İzmir Institute of Technology. Mechanical Engineering.

Tek Biçim Eser Adı
Thesis (Master)--İzmir Institute of Technology: Mechanical Engineering.
 
İzmir Institute of Technology: Mechanical Engineering--Thesis (Master).

Elektronik Erişim
Access to Electronic Versiyon.


LibraryMateryal TürüDemirbaş NumarasıYer Numarası
IYTE LibraryTezT001629TJ1355 .J86 2017
IYTE LibraryEk CD-ROMROM2794TJ1355 .J86 2017 EK.1