Foaming of waste glass of a glass polishing factory
tarafından
 
Attila, Yiğit.

Başlık
Foaming of waste glass of a glass polishing factory

Yazar
Attila, Yiğit.

Yazar Ek Girişi
Attila, Yiğit.

Yayın Bilgileri
[s.l.]: [s.n.], 2012.

Fiziksel Tanımlama
xi, 69 leaves.: ill. + 1 computer laser optical disc.

Özet
The foaming behavior of a glass powder, a residue from a window glass polishing factory in Bursa, was investigated at the temperatures between 700-950°C. As-received glass powder composition, 72.76% SiO2, 11.18% Na2O, 11.31% CaO, 1.74% MgO and 1.61% Al2O3, was well matched with that of soda lime window glass. The expansion of the glass powder compacts started at a characteristic temperature of 690-700 °C and reached a maximum volumetric expansion values at about 866-877 °C. The maximum volume expansion and foam density varied between 700-772% and 0.378-0.206 g/cm3, respectively. The foaming of the compact at 750 °C yielded only crystalline phase of quartz, as the foaming temperature increased over 750 °C, wollastonite and diopsite crystals formed The compressive strength of the foams ranged between 1.9 and 4 MPa and the thermal conductivity between 0.048-0.079 W/K m. Both collapse and plateau stresses increased with increasing relative density, while heating rate was found to be not affect the collapse and plateau stresses. The foamed glass samples showed the mechanical behavior similar to open cell foams. This was attributed to the thicker cell edges and thinner cell walls leading to higher glass material accumulation on the cell edges. The self-foaming behavior of the studied waste glass powder was attributed to the organic compounds within the boron oil which was used as a coolant in the polishing operations.

Konu Başlığı
Foamed materials.
 
Cellular glass.

Yazar Ek Girişi
Taşdemirci, Alper.

Tüzel Kişi Ek Girişi
İzmir Institute of Technology. Materials Science and Engineering.

Tek Biçim Eser Adı
Thesis (Master)--İzmir Institute of Technology: Materials Science and Engineering.
 
İzmir Institute of Technology: Materials Science and Engineering--Thesis (Master).

Elektronik Erişim
Access to Electronic Versiyon.


LibraryMateryal TürüDemirbaş NumarasıYer NumarasıDurumu/İade Tarihi
IYTE LibraryTezT001053TA418.9.F6 A88 2012Tez Koleksiyonu