Unlimited-wokspace teleoperation
tarafından
Şahin, Osman Nuri.
Başlık
:
Unlimited-wokspace teleoperation
Yazar
:
Şahin, Osman Nuri.
Yazar Ek Girişi
:
Şahin, Osman Nuri.
Yayın Bilgileri
:
[s.l.]: [s.n.], 2012.
Fiziksel Tanımlama
:
xiv, 109 leaves.: ill. + 1 computer laser optical disc.
Genel Not
:
02.01.2014 tarihine kadar tam metin erişimi yazar tarafından kısıtlanmıştır.
Özet
:
Teleoperation is, in its brief description, operating a vehicle or a manipulator from a distance. Teleoperation is used to reduce mission cost, protect humans from accidents that can be occurred during the mission, and perform complex missions for tasks that take place in areas which are difficult to reach or dangerous for humans. Teleoperation is divided into two main categories as unilateral and bilateral teleoperation according to information flow. This flow can be configured to be in either one direction (only from master to slave) or two directions (from master to slave and from slave to master). In unlimited-workspace teleoperation, one of the types of bilateral teleoperation, mobile robots are controlled by the operator and environmental information is transferred from the mobile robot to the operator. Teleoperated vehicles can be used in a variety of missions in air, on ground and in water. Therefore, different constructional types of robots can be designed for the different types of missions. This thesis aims to design and develop an unlimited-workspace teleoperation which includes an omnidirectional mobile robot as the slave system to be used in further researches. Initially, an omnidirectional mobile robot was manufactured and robot-operator interaction and efficient data transfer was provided with the established communication line. Wheel velocities were measured in real-time by Hall-effect sensors mounted on robot chassis to be integrated in controllers. A dynamic obstacle detection system, which is suitable for omnidirectional mobility, was developed and two obstacle avoidance algorithms (semi-autonomous and force reflecting) were created and tested. Distance information between the robot and the obstacles was collected by an array of sensors mounted on the robot. In the semi-autonomous teleoperation scenario, distance information is used to avoid obstacles autonomously and in the force-reflecting teleoperation scenario obstacles are informed to the user by sending back the artificially created forces acting on the slave robot. The test results indicate that obstacle avoidance performance of the developed vehicle with two algorithms is acceptable in all test scenarios. In addition, two control models were developed (kinematic and dynamic control) for the local controller of the slave robot. Also, kinematic controller was supported by gyroscope.
Konu Başlığı
:
Mobile robots.
Robots -- Design and construction.
Manipulators (Mechanism).
Haptic devices.
Yazar Ek Girişi
:
Dede, Mehmet İsmet Can.
Tüzel Kişi Ek Girişi
:
İzmir Institute of Technology. Mechanical Engineering.
Tek Biçim Eser Adı
:
Thesis (Master)--İzmir Institute of Technology: Mechanical Engineering.
İzmir Institute of Technology: Mechanical Engineering--Thesis (Master).
Elektronik Erişim
:
Library | Materyal Türü | Demirbaş Numarası | Yer Numarası | Durumu/İade Tarihi |
---|
IYTE Library | Tez | T001083 | TJ211.415 .S13 2012 | Tez Koleksiyonu |