Fabrication and characterization of superconducting bi2212 bolometer for the detection of THz waves
tarafından
 
Kurt, Metin, author.

Başlık
Fabrication and characterization of superconducting bi2212 bolometer for the detection of THz waves

Yazar
Kurt, Metin, author.

Yazar Ek Girişi
Kurt, Metin, author.

Fiziksel Tanımlama
xii, 83 leaves: color illustraltions.+ 1 computer laser optical disc.

Özet
Since terahertz (THz) waves can pass through materials like clothing, plastic, wood, ceramic, leather and without harm to the body, it can be used for characterization, detection and 3D imaging of these materials. THz application area expands day by day such as high-speed wireless communications, medical imaging, security in airports and shopping centres and detection of chemical and biological materials. Rapidly increasing applications of the electromagnetic waves (EM) in the under developed terahertz frequency (0.1-10 THz) range requires a well understandings of efficient terahertz wave detection. An intense, coherent and continuous electromagnetic wave source is obtained by High-Tc superconductor Bi2Sr2CaCu2O8+δ (Bi2212) single crystal. At the same time Bi2212 single crystal can detect THz waves in suitable conditions. Nowadays, different types of bolometers are used for detection of THz waves. But they have many limitations like slow response time which is the most significant problem and costly cryogenic spending. In this study, single crystal of Bi2212 is cleaved to layer by layer by scotch tape until the necessary is reached thickness. Afterwards, it is pasted on a sapphire substrate and the scotch tape is etched with the aid of chloroform solution and ultrasonic cleaner. After the crystal fabrication, the exact thickness of the crystal were obtained using atomic force microscopy. Then, the samples were annealed at 400oC for 1 hour in order to adjust the oxygen doping level and then deposited with 150 nm Au layer by thermal evaporation. Afterwards they were annealed again at 425oC for 30 minutes to decrease the contact resistivity. After clean room process, our log-periodic antenna design was formed on the crystal by using e-beam lithography and Ar-ion beam etching step by step. Finally, four probe wires were connected to the two contact paths and log-periodic antenna by silver epoxy. The temperature dependence of a-b axis resistivity (R-T) for Bi2212 single crystals were performed.

Konu Başlığı
Bolometer.
 
Terahertz technology.

Yazar Ek Girişi
Aygün Özyüzer, Gülnur

Tüzel Kişi Ek Girişi
İzmir Institute of Technology. Physics.

Tek Biçim Eser Adı
Thesis (Master)--İzmir Institute of Technology: Physics.
 
İzmir Institute of Technology: Physics--Thesis (Master).

Elektronik Erişim
Access to Electronic Versiyon.


LibraryMateryal TürüDemirbaş NumarasıYer Numarası
IYTE LibraryTezT001328QC338 .K96 2014