The investigation of the dynamic compression characteristics of a layered glass system
tarafından
 
Ağırdıcı, Burak, author.

Başlık
The investigation of the dynamic compression characteristics of a layered glass system

Yazar
Ağırdıcı, Burak, author.

Yazar Ek Girişi
Ağırdıcı, Burak, author.

Fiziksel Tanımlama
xi, 78 leaves: charts;+ 1 computer laser optical disc

Özet
Layered glass structures are one of the most common material types used in air, land, and sea vehicles. Since these structures are exposed to external impact loads, it is important to determine their dynamic mechanical behavior. In this study, dynamic compression characteristics of the layered glass system were investigated numerically using the LS-DYNA finite element program. The Johnson Holmquist Ceramics material model was used for the glass layer, the Ogden Rubber material model, which is used in material models with high elastic structural behavior was used for the polyvinyl butyral (PVB) interlayer, and the SAMP-1 material model was used for the polycarbonate interlayer. Numerical studies were carried out to investigate the stress wave propagation, the amount of energy released, and the deceleration rate of the penetration velocity. Split Hopkinson Pressure Bar setup was used to numerically load the layered glass systems at high strain rates for a reliably easy controlled wave generation. The layered glass structure consisting of two interlayer types with different thicknesses was loaded in the SHPB system, and the effect of the interlayer material type and thickness on the stress wave propagation was investigated. Then, the projectile impact test was modeled at different impact velocities for a square plate of PVB-layered glass structure. The thickness of the PVB interlayer was kept constant, while the thickness and location of the glass layer varied. From the results, the slowing rate of the projectile, the amount of erosion energy, and the energy balance were determined.

Konu Başlığı
Glass construction.
 
Glass -- Fracture.

Yazar Ek Girişi
Taşdemirci, Alper,

Tüzel Kişi Ek Girişi
İzmir Institute of Technology. Mechanical Engineering.

Tek Biçim Eser Adı
Thesis (Master)--İzmir Institute of Technology: Mechanical Engineering.
 
İzmir Institute of Technology: Mechanical Engineering--Thesis (Master).

Elektronik Erişim
Access to Electronic Versiyon.


LibraryMateryal TürüDemirbaş NumarasıYer NumarasıDurumu/İade Tarihi
IYTE LibraryTezT002776TA450 .A26 2023Tez Koleksiyonu