Skip to:ContentBottom
Preparation and rheological characterization of calcium silicate/aluminate based cementitious inks için kapak resmi
Preparation and rheological characterization of calcium silicate/aluminate based cementitious inks
Başlık:
Preparation and rheological characterization of calcium silicate/aluminate based cementitious inks
Yazar:
Keleş, Pelin, author.
Yazar Ek Girişi:
Fiziksel Tanımlama:
xiii, 91 leaves: charts;+ 1 computer laser optical disc.
Özet:
Increasing number of bone tissue transplant operations conducted every year has increased the use of bone grafts and bone replacement materials. The commonly employed treatment methods however have several disadvantages. Bone tissue engineering scientists has been conducting intensive research on 3D scaffolds to overcome these disadvantages. Although different materials such as hydrogels, polymers, and metals are heavily used for scaffolds the most suitable material is agreed to have a ceramic/inorganic structure since they have a similar composition to the natural bone. The perfect material for 3D scaffolds formation however has not been found due to the rheological limits of inks/suspensions used in this versatile consolidation technique. Tricalcium aluminate (C3A) and tricalcium silicate (C3S) cement powders were produced with three different marble dust sources and two different silica sources in this work. The produced powders were combined with additives such as magnesium sulfate (MgSO4), hydroxyethyl cellulose (HEC), gluconic acid (GA), polyethylene glycol (PEG), trisodium sulfate (TSC) and sodium dodecyl sulfate (SDS) for the optimization of 3D printing cementitious inks/suspensions through the investigation of their rheological properties. The optimum firing temperature for C3A powder was determined to be 1300oC with 2 hours hold period while it was found to be 1400oC for 4 hours for C3S powder preparation with rapid cooling to room temperature. The use of C3A suspensions in 3D printers necessitate the presence of 1M MgSO4 which acts as a retarder; 2% HEC and 1% PEG for increasing stability; and finally, 10% marble dust and silica. C3S suspensions should contain 1M gluconic acid, 2.5% HEC, 1% PEG, 0.1M trisodium citrate and 0.1M sodium dodecyl sulfate. Capillary rheometer results are compatible with oscillating rheometer results and have been the subject of a preliminary study for 3D printers in this thesis work.
Tek Biçim Eser Adı:
Thesis (Master)--İzmir Institute of Technology:Chemical Engineering.

İzmir Institute of Technology: Chemical Engineering --Thesis (Master).
Elektronik Erişim:
Access to Electronic Versiyon.
Ayırtma: Copies: