Isothermal corrosion testing of frit furnace refractories için kapak resmi
Isothermal corrosion testing of frit furnace refractories
Başlık:
Isothermal corrosion testing of frit furnace refractories
Yazar:
Balıkoğlu, Fatih.
Yazar Ek Girişi:
Yayın Bilgileri:
[s.l.]: [s.n.], 2008.
Fiziksel Tanımlama:
xii, 94 leaves.: ill. + 1 computer laser optical disc.
Özet:
Results of a project aimed at understanding the corrosion behavior of aluminosilicate type of refractories in frit melts are presented. A refractory of largely andalusite and silimanite composition was compared to another brick of mullite and silimanite composition which was made by a different manufacturer for use in a different frit furnace. Density, porosity, microstructure and chemistry of both bricks are characterized before the corrosion tests. Isothermal tests were conducted by partially immersing a 15x15x115mm square specimen into a frit melt between 1404 and 1504oC in a vertical tube furnace. The frit used had an industrially used transparent frit composition. The effects of temperature, duration of exposure and refractory type were investigated using a statistically designed set of experiments. The ANOVA (Analysis of variance) table indicated that temperature and duration were more important factor effects. Increasing exposure duration and temperature both led to increased amount of corrosion as measured by the cross sectional area loss of the corroded specimen.Postmortem microstructural analysis was also done on the specimens and extensive amount of ZnO.Al2O3 precipitation was observed along the frit-refractory interface where also other crystals of mullite and alumina were found to precipitate. Increasing amount of duration and temperature produced more ZnO.Al2O3 precipitation. As identified by SEM-EDS analysis, mullite cyrstals were in the needle like morphology while alumina crystals were generally cubic. Because of their small concentration, XRD analysis could not reveal the phases of these crystals. More experiments were done by rotating the specimens in the melt at 50 rpm of rotational speed. Due to the reduction of boundary layer thickness, more dissolution was observed from the rotated specimens. In all specimens corrosion was more pronounced in the bond phase than through the large filler grains of mullite and andalusite.Keywords: Refractories, frit, corrosion, test.
Yazar Ek Girişi:
Tek Biçim Eser Adı:
Thesis (Master)--İzmir Institute of Technology: Materials Science and Engineering.

İzmir Institute of Technology: Materials Science and Engineering--Thesis (Master).
Elektronik Erişim:
Access to Electronic Version.
Ayırtma: Copies: